SRAM S700 2×10-speed DoubleTap? Shift-Brake Control Hydraulic Rim Brake Set

Description

SRAM
S700 2×10-speed DoubleTap? Shift-Brake Control Hydraulic Rim Brake Set
S700 2×10-speed DoubleTap? Shift-Brake Control with hydraulic rim brakes and SwissStop brake pads.
Features – SRAM? S-700 DoubleTap? Shifters/ Hydraulic Rim Brake 2×10-speed compatible only All new design inside and out Revised ergonomics for better finger wrap and a revised shifter paddle for improved finger clearance Individual Reach Adjust Aluminum shift & brake levers Low hand force required Fully sealed system for no contamination Easy bleed access Tool-free contact point adjust Tire clearance of 28mm and Zipp Firecrest? rim compatibility (27.4mm) Forged aluminum arms with SwissStop? pad compound Product features Use: Road Group: S700 Lever reach adjust: Yes Brake-type: Hydraulic Rim Brake Rim pads:?SwissStop Brake fluid:?DOT 5.1 Mount: left – front / right – rear Gear system: front 2-speed / rear 10-speed Brake hose length: front 600mm / rear 1300mm Max. tyre width: 28C? Technologies: DoubleTap?, Connectamajig? Material Brake lever:?Aluminium Shift lever:?Aluminium Brake arm: Aluminium Color black Scope of delivery 1 x Sram S700 2×10-speed DoubleTap? Shift-Brake Control Hydraulic Rim Brake Set 2 x Gear Wire2 pair Brake Pads SwissStop 2 x Tub Joint Kit (Insertpin + Olive) Mounting Hardware Ready for installation, completely assembled and bleeded! Technologies DoubleTap?
DoubleTap? makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. DoubleTap? uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever. With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15? angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly. Location, Location, Location: DoubleTap?s one-motion unidirectional levers (05) work flawlessly no matter what position you?re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops. Unlike all other forward controls, DoubleTap? also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip. On DoubleTap? controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally?an unfortunate side effect of other shift/brake lever designs.
Connectamajig?
Connectamajig? is the coupling hose that makes initial set-up of hydraulic systems easy, fast and convenient. The intimidation of hydraulics is gone with a push and a twist; it?s just that easy. Connectamajig allows for several disconnects and reconnects before a system bleed is required.