CubeHanzz SL 26 Frame green’n’black

Description

Cube
Hanzz SL 26 Frame green’n’black

The Hanzz SL frame is optimized for low weight while still delivering high performance for rough terrain and freeride trails.
Go play in the park or check that steep rocky section in your trail. The High Performance 7005 Aluminum frame features FR FSP4 bar rear suspension with 180mm of travel ? perfect for freeride action. Product features Material:?Aluminium 7005 HPA Ultralight, Advanced Hydroform, FSP 4-Link, ISCG Mount, X12 Seat post: 31.6mm Seat clamp: 34.9mmFront deraileur:?34.9mm (Top-Swing) / cable routing downside Headtube diameter:?1 1/2″ (ZS 49mm) ?semi-integrated Bottom bracket housing:?BSA Disc brake mount rear:?IS2000 Wheel size:?26″ Rear Shock installation length:?216x64mm Bushings:?22x8mm / 22x8mm Recommended Fork Travel: 180mm Dropout:?Thru Axle X12 (12x142mm) Color green’n’black Weight 4050g (L) Scope of delivery Cube Cube Hanzz SL 26 Frame green’n’black Rear Shock (216x64mm), Bushings (22x8mm / 22x8mm)?and Thru Axle (12x142mm) not included!
Technologies High Performance Aluminum
For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.

X12 Through Axle (12x142mm)
In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.

Wet Paint Surface
On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.

Model year: 2014

Model year: 2014