Cube Nuroad Frame black?n?red

Description

Cube
Nuroad Frame black?n?red
Take the long way home, even if it means leaving the reassuring smoothness of Tarmac behind. The all new Cube Nuroad frame combines all the best qualities of our road race and cyclocross series.
The Gravel Bike for all roads: Cube Cube Nuroad Frame in black?n?red for disc brakes When we set out to develop the Nuroad we had a destination in mind, but no specific route by which to get there. We did, however, have a lot of experience building great race and ‘cross bikes. Figuring that this would be a great place to start, we combined the best of both genres to create our new, super-adaptable all-rounder. So, for example, the Nuroad’s geometry is based on the comfort, stability and agility of our Attain series, but the sizing is the same as our Cross Race bikes. We made sure there’s plenty of clearance to run wide, grippy and comfortable tyres up to 40mm width, and even left room for mudguards too. Internal cable routing keeps your gears shifting cleanly even when the mud and water’s flying around, there’s a replaceable gear hanger.?
Product features – Nuroad Frame black?n?red Material:?Aluminium 6061 T6 Superlite, Gravel Comfort Geometry, Flat Mount Disc, Fender & Rack Option, 12x142mm, AXH Seat post: 27.2mm Seat clamp:?31.8mm Front deraileur:?31.8mm?/ cable routing from below Headtube diameter:?Tapered 1 1/8″ (ZS 44mm) ?semi-integrated?- 1 1/2″ (IS 52mm) integrated Bottom bracket housing:?Pressfit 86mm Wheel size:?28″ Dropout:?12x142mm Brake type:?Flat Mount Disc Suitable fork Cube Nuroad Disc Fork Color black?n?red Weight approx. 1870g (56cm) Scope of delivery Cube Nuroad Frame black?n?red Thru Axle 12x142mm not included!
Technologies Aluminium Superlite
Extremely high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. Our Superlite tubes are double butted, giving very light tubesets with a high level of stiffness.
Integrated Cable Routing
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
Press Fit BB
With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.
Tapered Steerer
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
Advanced Mechanical Forming
With our Advanced Mechanical Forming technology we can mechanically transform different frame tubes and thus optimize them without material-wearing welding work for the respective requirements. Along the obtained organic look, the production method is primarily motivated by functional reasons. Multiple converted tubes enable us to manufacture lighter and also stiffer aluminum frames.
Wet Paint Surface
On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
X12 Through Axle
In this system, a cone is used to form a play-free connection. It is only necessary to tighten the axle from one side. The position of the wheel is done by an insert in the right-hand dropout which is secured by a bolt. The main advantages of the Syntace system are quick and simple changing of the wheel, reliable position of the brake disc and higher stiffness of the rear of the bike. This allows the assembly to be made lighter than a conventional through-axle.
Adaptable X12 Hanger
We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it’s also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

Model year: 2018

Frequently Bought Together:
Cube
Nuroad Pro Frame black?n?grey
RRP*
249,- ?

119,- ?
Cube
31,8mm Seat Clamp
RRP*
8,90 ?

3,95 ?